IPv6 Ready Log Phase-2 테스트 환경 구축

IPv6 Ready Log Phase-2

Environment

Needed Tools

• FreeBSD 7.3
• Perl 5.10
• v6eval-3.3.3
• ct-2.1.1
• Self_Test_5.0.0

Install FreeBSD-7.3

You can download FreeBSD image file at this Link.
If you want to download FreeBSD-7.3, Use this Link.

Installing perl-relatd modules

# (cd /usr/ports/lang/p5-Expect && make install)
# (cd /usr/ports/security/p5-Digest-MD5 && make install)
# (cd /usr/ports/textproc/p5-YAML && make install)

Install IPV6 Evaluation Platform

Download v6eval-3.3.3.tar.gz

# tar zxvf v6eval-3.3.3.tar.gz
# cd v6eval-3.3.3
# make
# make install

After installing platform, You can see the new directory at /usr/local/v6eval

Install ct package : ct-2.1.1

This is IPv6 conformance test package.

# tar -xvf ct-2.1.1.tar.gz
# cp -rf ct-2.1.1 /usr/local/v6eval/
# cd /usr/local/v6eval/ct-2.1.1
# make install

Install Ipv6 Self Test Script : Self_Test_5-0-0

# tar -xvf Self_Test_5-0-0.tar
# cp -rf Self_Test_5.0.0 /usr/local/
# vi /etc/rc.conf
  ipv6_enable="YES"
  ifconfig_fxp0="up"
  ipv6_network_interfaces="fxp0"
  ipv6_default_interface="fxp0"
# cd /usr/local/v6eval/etc
# cp tn.def.sample tn.def
# cp nut.def.sample nut.def

Interface might change other name as em0. It is dependet on environment of TN(Tester Node).

• em : Intel(R) PRO/1000 Gigabit Ethernet adapter driver
• fxp : Inter(R) PRO/100 Ethernet device driver

Modify tn.def and nut.def

# vi /usr/local/v6eval/etc/tn.def

tn.def

• Added # at Remote Controal Configuration as below.
• Deleted # at filter ipv6.
• Added link name

#
# tn.def
#
#  Information about the Tester Node (TN)
#

#
# Remote Controal Configuration
#
#RemoteDevice    cuad0
#RemoteDebug    0
#RemoteIntDebug    0
#RemoteLog    1
#RemoteSpeed    0
#RemoteLogout    0
#RemoteMethod    serial
filter    ipv6

#linkname    interface    BOGUS ether source address
#        name        of the Tester Interface
Link0        em0        00:0C:xx:xx:xx:xx
#Link0        ed0        00:00:00:00:01:00
#Link1        de1        00:00:00:00:01:01
#Link2        de2        00:00:00:00:01:02
#Link3        de4        00:00:00:00:01:03

nut.def

Wirte information of NUT which you want to test at nut.def as below.
You have to change “HostName” and link information.

#
# nut.def
#
#  Information about the Node Under Test (NUT)
#

# System type
System        manual

# System information
TargetName    FreeBSD/i386 4.9-RELEASE + kame-20040726-freebsd49-snap

# Name
#HostName    target.tahi.org
HostName     kaizen-a34x

# Type
#   host, router, special
Type        host

# Super user name and it's password
# if you select manual as "System", you don't care "User" and "Password"
#
User        root
Password    v6eval

#linkname    interface    The EXACT ether source address
#        name        of the Interface Under Test
Link0         eth0       00:E0:xx:xx:xx:xx
#Link1        fxp1       00:00:92:a7:6d:f6
#Link2        de0        00:c0:f6:b0:aa:ef
#Link3        de1        00:00:92:a7:6d:f8
#Link4        de2        00:90:27:14:ce:e3

To run the test

If NUT is a host, You can execute these command for test. When all tests are completed, you can see the results at /usr/local/Self_Test_5-0-0-/index.html

# cd /usr/local/Self-Test-5-0-0
# make ipv6ready_p2_host

At the NUT side, You can see to communicate ipv6 packet using wireshark.